Lithium Battery Pack Double-Sided Automatic Spot Welder Battery
Welding
Equipment introduction
● The automatic double-sided spot welding machine adopts
double-sided spot welding at the same time, the production
efficiency is higher without connecting the gas source, and the
welding fluctuation caused by the unstable pressure of the gas
source is avoided, and the welding speed is fast and the precision
is high.
● The battery full-automatic spot welding machine adopts
straight-through design structure (can be forward and out).
● The back end is easy to dock with other assembly processes, which
makes the battery assembly process easier and faster.
● It is suitable for welding and assembling power battery packs
smaller than 0.3MM nickel sheet.
● Lithium battery spot welding machine adopts transistor welding
power source, which has the advantages of fast rising current and
high welding efficiency.
● Explosion welding virtual welding equipment automatic alarm,
manual adjustment of automatic area repair welding, single point
repair welding.
● Lithium battery spot welder has the functions of manual
programming and CAD drawing.
● The spot welding path can be quickly imported through CAD drawing
to realize programming.
● Easy to learn, production line workers can do it.
● The automatic battery spot welding machine adopts high-definition
liquid crystal touch screen, and the human-computer interface is
easy to operate.
● Independently develop a variety of automatic intelligent systems
to facilitate the setting of equipment running status, so that the
production capacity is doubled.
● It has energy switching function, production counting function,
welding needle compensation function and manual debugging function.
● Panasonic servo motor control, fast response, accurate and
efficient control, long service life, not easy to damage.
● Using Taiwan HIWIN module, high precision, low noise, smooth
sliding, durable.
● The whole machine adopts imported parts with long service life
and low damage rate.
● Aluminum alloy skeleton, imported acrylic shielding board,
beautiful and generous sense of science and technology,
comprehensive visual operation, improve production safety factor.
Application case
1. Energy storage battery pack 2. Electric bicycle battery pack 3.
Power tool battery pack
Technical specification
| Production efficiency | 3000PCS/H | Welding source | Transistor/multipulse (Optional) |
| Welding thickness | 0.02-0.3MM | Type of cooling | Forced water circulation cooling |
| XY shaft welding stroke | 400MM*600MM | Mode of motion | Automatic continuity |
| XY shaft welding accuracy | 0.1MM | Welding pressure | 5KG/F |
| Electrode material | Copper alumina | Machine Dimensions | 1400*1000*1680MM |
| Welding head rotation | NO | Machine Weight | 330KG |
| Power source specification | Single-phase 220V50/60HZ | Application scenarios | Cylindrical battery welding |
Function Introduction
1. Hd touch screen
Real-time display of welding data, welding hole location. System
parameter setting is simple and easy to learn.
Support manual programming, CCD mapping, import solder joint path
to achieve fast programming.
2. Electric precision welding head
No need to connect the air source, low noise. The built-in pressure
sensor can monitor and control the instantaneous pressure of
welding head. Precision welding head, small pressure inertia, soft
pressure
3. Transistor welding power supply
Welding energy output is the most stable power supply, real-time
display of welding voltage and current waveform, current rising
fast, can achieve high quality welding in a short time.
FAQ
Q: I don't know which one is right for me?
A: Please tell us the following information
1) Battery model and type.
2) Welding material and welding thickness
3) Commercial industry: We have a lot of sales experience and can
provide you with advice.
Q: What's your minimum order quantity?
A: We don't have a minimum order quantity. Whether it is an order
of 1 or 100, we will wholeheartedly support you.
Q: How do I install and run the machine?
A: Our technicians had installed the machine before shipment. For
the installation of some widgets, we will send out detailed
training videos and user manuals randomly. 95% of customers can
teach themselves.
Q: How can I do if the machine goes wrong?
A: If you encounter such problems, please contact us as soon as
possible. Do not try to repair the machine by yourself or others.
We will respond as soon as possible within 24 hours to solve your
problem.
Q: How does your factory do in terms of quality control?
A: Quality comes first. More than 20 tests will be performed on
each unit. After all the tests are passed, our QC will test the
welding performance.
Service process
Pre-sale:
1. Customers send inquiries and inquiries
2. Recommend products according to customer needs
3. Video communication to confirm final requirements
4. Both parties shall deliver the confirmation of technical
specifications
5. Both parties sign the contract
6. Place orders and arrange production in the workshop
7. Arrange delivery
After sale:
1. Confirm whether customers need on-site service or video
communication guidance for debugging equipment.
2. If there is any problem with the equipment, video communication
will be adopted to solve the problem first. Door-to-door service
can be provided if there is no solution.
Looking forward to your consultation, we will provide you with the
best quality service throughout the process!!!
